15mm Front Coil Strut Shock Spacer for Toyota Hilux VIGO Lift Kit 2005-2021 N70 N80
Suit
Toyota (KUN) Hilux 05 on
Toyota Hilux (GUN) 2015 on
Toyota Prado 120 series 2003 onwards
Toyota Prado 150 series 2009 onwards
Toyota FJ Cruiser 2011 onwards
Toyota 4Runner (5th Gen)
Toyota Fortuner
These front strut coil spacers are 15mm thick.
Features
Notes
It is recommended to arrange a front-end wheel alignment after installation.
Failure to do so can result in alignment issues and uneven tyre wear.
Warranty
2 Year Warranty
Front Spacers 15mm x 2
Installation recommends
-It is recommended that the Coil Strut Spacers are installed by a qualified and licensed mechanic. These instructions are only included as a rough guide to installation. All Bolts and Hardware removed should be double checked to ensure re-fitment to relevant factory specifications.
Dimensions
- Brand new front strut spacers 15mm
- Built to strict OEM standards specifications
- These spacers are 15 mm thick and will lift the front of your car around 1" inch
- The 15 mm spacers fit on top of your strut top
- The lift spacer is NOT a 1:1 ratio - means that the lift height achieved is much greater than the actual thickness of the spacer, as the lower control arm compounds the amount of lift due to its angle and length
- You can use these with your standard suspension or with aftermarket suspension to help level out the typical nose down appearance that the 4x4 vehicles have
Front Strut Spacers 15mm suits Toyota Hilux Lift Kit 05-21 N70 N80 front Coil Shock Suspension KUN GUN
